21 Aug Open HW8_P1.dwg in Civil3D.

Civil3D:

The files referenced below are in the Assignment 8 folder.

1. Open HW8_P1.dwg in Civil3D. Complete the following tasks. (Filename format: YourLastName_HW8_P1)

Create sample lines along the Jordan Court alignment.

a. Make “Design” the sample line group name.

b. Sample line style: “Road Sample Line”

c. Sample line label style: “Section Name”

d. Only put a check in the box next to Jordan Court

e. On the Sample Line Tools toolbar, select the creation method “From Corridor Stations.” Accept defaults.

2. Open HW8_P2.dwg in Civil3D. Complete the following tasks. (Filename format: YourLastName_HW8_P2)

Create a cross-section view of station 13+25 on the right side of the drawing by clicking on the sample line at that station.

a. Select alignment: “Jordan Court”

b. Sample line group name: “Design”

c. Sample line: “13+25”

d. Station: “13+25.00’”

e. Section view style: “Design”

3. Open HW8_P3.dwg in Civil3D. Complete the following tasks. (Filename format: YourLastName_HW8_P3)

Create multiple cross-section views along the road by clicking on “Section views” -> “Create multiple views”.

a. Sample line group name: “Section Sheets”

b. Placement options: “Draft”

4. Open HW8_P4.dwg in Civil3D.

Complete the following tasks. (Filename format: YourLastName_HW8_P4)

a. Create a sewer pipe network from the green polyline along Jordan Court by clicking on “Pipe network” -> “Create pipe network from object”.

a. Click on the green polyline and accept the current flow direction.

b. Network name: “Sanitary”

c. Network parts list: “Sanitary Sewer”

d. Surface name: “Road FG”

e. Alignment name: “Jordan Court”

f. Check the “erase existing entity” box.

b. Repeat the process for Madison Lane. Use a network name of “Sanitary-2”

c. Repeat the process for the Madison Lane cul-de-sac. Use a network name of “Sanitary-3”

5. Open HW8_P5.dwg in Civil3D. Complete the following tasks. (Filename format: YourLastName_HW8_P5)

Create a stormwater pipe network along Jordan Court that discharges at a location across Emerson Road through “Pipe network” -> “Pipe network creation tools”.

a. Network name: “Storm1”

b. Network parts list: “Storm Sewer”

c. Surface name: “Road FG”

d. Alignment name: “Jordan Court”

e. Click OK. Insert a curb inlet structure on Jordan Court at station 5+50. i. Select the Rectangular Junction Structure NF -> Curb Inlet ii. Select the concrete pipe -> 15 inch diameter

f. Turn off all object snapping except for Center snapping

g. Click on the center of the red circle to the east of station 5+50.

h. Click on the center of the red circle to the west of station 5+50.

i. Click on the center of the red circle to the south of station 2+40.42.

j. Change the pipe diameter now to 18 inch concrete pipe.

k. Click on the center of the red circle at station 2+40.42.

l. Insert a storm manhole structure. i. Select the Cylindrical Junction Structure NF -> Storm Manhole ii. Select the concrete pipe -> 24 inch diameter

m. Click on the center of the red circle located at the western corner of the Common Area.

n. Insert a headwall structure. i. Select the Concrete Rectangular Winged Headwall -> Winged Headwall for 24”

o. Click on the center of the red circle on the opposite side of Emerson Road

.

6. Complete Module 8 – Tutorial 1 – “Configuring Pipe Networks.” This problem shows you how to create and edit the parts list for a pipe network. (Filename format: YourLastName_HW8_P6)

Our website has a team of professional writers who can help you write any of your homework. They will write your papers from scratch. We also have a team of editors just to make sure all papers are of HIGH QUALITY & PLAGIARISM FREE. To make an Order you only need to click Ask A Question and we will direct you to our Order Page at WriteDemy. Then fill Our Order Form with all your assignment instructions. Select your deadline and pay for your paper. You will get it few hours before your set deadline.